2pcs Indicator LED Car Bulbs 16W High Power P21W or PY21W YELLOW AMBER
- Base: 382 P21W( BA15S); 581 PY21W (BAU15S);
- Operating Voltage: 9-32V
- Light Chip: 2*5W High-Power chip +4*1.5W High Power LED
- LED Quantity: 6pcsBrightness Efficiency: 660LM
- Power Consumption: 4.9W
- 2pcs set, 2 YEARS WARRANTY!!
High Quality, branded Indicator LED bulbs 2pcs Yellow/Amber
These bulbs should be used to replace standard 382 P21W (BA15S) or 581 PY21W (BAU15S) front or rear indicators.
These bulbs will require external additional load resistors or replace indicator relay flasher to prevent hyper flashing or bulb off warning message. (also available in our shop)
Some cars like BMW, VW , Audi or others could be coded to exclude lamp that LED bulb is used to exclude it from Can-Bus monitoring system (recommended), than install of additional resistors or replacing relay flasher is no needed
You may also need Load Resistors for your LEDs
FAQ -Frequently Asked Questions - about LEDs
Hi, You will need 2 of these:
https://www.auto-lighting.co.uk/product-eng-5876-25W-10ohm-LED-Resistor-Decoder-Canceller-CanBus.html
